|
|
|
 |
| WATERPROOF FOR ROOF DECK |
|
|
 |
| |
Refer to Standard Specifications |
|
| 1. |
Cut out joint at least 20mm wide and deep. To apply one of CERESIT CR68 at the rate of
1 kg / sq. meter. to all joint surface between pours. Apply second coat when first coat
has taken initial set. |
| 2. |
Fill slot to surface with MICSIL 4001 mortar. |
| 3. |
Make achamfer at slab/adjacent curbwall re-entrant angles with MICSIL 4001 mortar. |
| 4. |
To slab and adjacent curbwall, apply one coat of MICSIL 170 at the rate of 0.35 to 0.4 kg / sq. meter. After the first coat has dry, apply next coat of MICSIL 170 at the rate of 0.35 to 0.4 kg / sq. meter.
The thickness of 3 layers MICSIL 170 will achieve 1mm. |
| 5. |
Spray two coats of MICSIL 777D at the rate of 0.35 liter / sq. meter. |
| |
Note: Before these applying processes, you can use MICSIL PU2000, MICSIL PU9000,
MICSIL PU9000PLUS or MICSIL 1000 to stop water if the concrete surface has moisture or
running water. |
| |
|
 |
Use products：MICSIL 170、MICSIL 4001、CERESIT CR68、MICSIL 777D |
|
|
|
|
 |
|
|
|
|
|
 |
 |
|
|
|
|
● Why PU coating in Taiwan usually fail? Is this type of waterproof material suitable for roof waterproof in Taiwan....>>
● Is the waterproofcoating better exposed or covered ....>>
● Why would the efflorescence be caused? Is there any way to solve it completely ....>> |
|
|
 |
|
|
